GC Gold Label Hybrid

Description

Experience the next generation of hand-mixed, self-adhesive posterior restorative featuring GC Advanced Glass Hybrid technology.

Packaging 

• 1 x 15gm powder
• 1 x 6.4ml liquid

GC Advanced Glass Hybrid Technology.

Advanced Glass hybrid technology is the combination of two types of Fluoro-Almino-Silicate(FAS) glass and also two types of polyacrylic acid.

• Smart particle size distribution, Gold Label HYBRID gets higher mechanical strength
• Finer size of FAS Glass particle decreases collision against visible light waves.The more light is passing through the restorative, it causes the restorative more translucent.
• Gold Label HYBRID consists of the glass which reacts with polyacrylic acid, helping the restorative matrix release high amount of fluoride.
• Gold Label HYBRID is consist of more acid resistance FAS glass and a higher molecular weight polyacrylic acid. These two components strengthen the restorative matrix and gives higher acid resistance.

 Indications :

• Class I and Class II restorations in deciduous teeth.
• Non-load bearing Class I and Class II.
• Intermediate restorative and base material for heavy stress situations in Class I and Class II cavities using the sandwich laminate technique.
• Class V and root surface restorations.
• Core build-up.

Key Specification 

– Powder/Liquid Ratio: 3.0/1.0 (g/g)
– Mixing Time: 25-30 sec
– Working Time (23°C/73°F): 1’45”
– Net Setting Time (37°C/99°F): 2’40”
– Finishing Time (37°C/99°F): 6’00”
– Storage:  Store at 4-25°C (39-77°F) for optimal performance.

DIRECTIONS TO USE:

– Powder and Liquid Dispensing:
– Standard ratio: 3.0g powder/1.0g liquid.
– Gently tap powder bottle, avoid shaking.
– Squeeze liquid bottle vertically, then close tightly.

– Cavity Preparation:
– Use standard techniques, minimal mechanical retention.
– Optionally apply CAVITY or DENTIN CONDITIONER.
– Rinse, keep surfaces moist.

– Mixing:
– Dispense and divide powder, mix first part for 10s.
– Add remaining powder, mix for 15-20s.

– Restorative Technique:
– Work time: 145s at 23°C.
– Transfer and shape cement, avoid air bubbles.
– Apply GC Fuji VARNISH or G-COAT PLUS.

– Finishing:
– Begin water spray finishing at 6 minutes.
– Apply final coat of GC Fuji VARNISH or G-COAT PLUS.
– Instruct patient to avoid pressure for 1 hour.