Woodpecker Dental Air Polisher AP-H

Description

Air polishing is a process of using compressed air to spray powder and water on the tooth surface through air-polishing equipment to remove the attachments (such as biofilm, pigment, soft dirt, etc.) and polish the tooth surface. Air polishing has become an indispensable tool for biofilm control in the new era. Compared with traditional ultrasonic scaling, air polishing is more efficient and comfortable, causing no scratch to the tooth surface, and is less likely to harm soft tissues, so as to reduce patient tension.

Key Specification 

• Input water pressure: 0.7bar to 2.2bar (70-220kPa)
• Input air pressure: 3.5bar to 4.5bar (350-450kPa)
• Working mode: continuous operation, Intermittent operation
• Weight: About 0.150kg
• Connector: Meets the requirements of YY / T 0514

Packaging 

• 1 x Powder storage chamber (Main Unit)
• 1 x Handpiece (AP-1)
• 1 x Needle (Long)
• 1 x Needle (Short)
• 1 x O-Ring needle
• 1 x Warranty card

Direction To Use

– Connect Dental Air Polisher to handpiece pipeline, ensuring a secure fit.
– Load powder into the chamber, ensuring even distribution and tightening the cover.
– Pre-spray outside the oral cavity for 1-3 seconds to ensure even air and water distribution.
– Maintain a distance of 3-5mm between spray-head outlet and tooth surface for supragingival air polishing.
– For subgingival air polishing, attach accessory nozzle and perform scaling motions in periodontal pockets of 4-9mm.
– Limit air-polishing time in each pocket to 5 seconds and adjust water flow and air pressure accordingly.

Note:

– Do not pull out the tail plug during operation.
– Use only subgingival powder for subgingival air polishing.
– Handpiece: The spray head can be rotated for easy removal in case of blockage.
– Powder storage chamber: Used for powder storage.
– Nozzle: Disposable accessory.